Industrial Hoses
Reinforced hose for hydraulic power, compressed air, water, chemicals and abrasive material transfer. The inner tube is chosen against the medium, the reinforcement against the pressure, and the cover against the environment. SES holds the range as an authorised JK Fenner distributor, covering bore sizes 6 mm to 150 mm; working pressure 10 bar to 400+ bar by construction; tube compounds NBR, EPDM, SBR, and chemical-specific grades; reinforcement Textile braid, single/double wire braid, 4- and 6-spiral. Executions include hydraulic hoses, pneumatic and air hoses, chemical transfer hoses, water suction and delivery hoses, among others. It is specified most often into hydraulic power packs and press circuits and plant compressed air and pneumatic tooling. Every part is genuine JK Fenner through official channels, with designation, specification and options confirmed against your duty before it ships — supplied from Kolkata and our branch network, with breakdown cover that does not sit in an inbox.
Send an enquiry
Check Price & Availability.
Give us the size or the failed part — we reply on WhatsApp.
Trusted across Metals & Energy
Supplying India’s Industrial Names.
From integrated steel plants to power utilities and EPC majors — the works that cannot afford a counterfeit part specify through SES.
Pressure
10 bar suction to 400+ bar hydraulic
Tube compounds
NBR, EPDM, SBR by medium
Reinforcement
Textile braid, wire braid, spiral
Temperature
−30 °C to +70 °C typical
Where it runs.
You will find Industrial Hoses in the parts of a plant where this particular duty actually occurs. In practice that means hydraulic power packs and press circuits, plant compressed air and pneumatic tooling, cooling water circulation, and equally acid, caustic and process chemical transfer, fly ash, cement and sand handling, fuel and lubricating oil transfer. What links them is the duty rather than the machine name — pressure: 10 bar suction to 400+ bar hydraulic. If your installation is not on that list it matters less than you would think: the operating condition decides the specification. Send us the load, the speed, the running temperature and the environment it runs in, and we will match it to the right execution in the JK Fenner range and confirm what is in stock.
Specify it against the duty.
Specification here follows the operating condition, not the catalogue. High-pressure hydraulic circuit with pressure spikes — Wire spiral reinforcement rated well above working pressure, and respect the minimum bend radius. Acid, caustic or solvent transfer — The tube compound confirmed against the specific chemical and concentration — never assume across media. Abrasive slurry or dry bulk conveying — A thick abrasion-resistant tube; standard hose wears through from the inside with no external warning. Where two of those apply at once, specify for the harsher of the two — under-specifying is what puts the part back on the bench a month later. Send us the duty and we will confirm the execution.
Ordering this from SES.
Hose assemblies fail at the fitting far more often than mid-length. Specify the coupling with the hose and have it crimped to the maker's die chart — field-assembled clamps on a high-pressure line are a safety issue, not just a leak.