Accessories for Lubrication Systems
Tube, hose, fittings, brackets, brushes, nipples, relief valves and the rest of the hardware between the metering block and the bearing. Systems rarely fail at the pump; they fail at a chafed hose or a cracked fitting on the last metre. SES holds the range as an authorised SKF distributor, covering tube Steel, stainless and polyamide in small bores; hose High-pressure grease hose with crimped end fittings; fittings Compression, flare and swivel types in steel and stainless; applicators Brushes, spray bars and pinion applicators. Executions include tube, hose and end fittings, swivel and articulating connections, brush and spray applicators, relief and non-return valves, among others. It is specified most often into feed tails from divider blocks to bearing housings and brush and pinion applicators on open gears and chains. Every part is genuine SKF through official channels, with designation, specification and options confirmed against your duty before it ships — supplied from Kolkata and our branch network, with breakdown cover that does not sit in an inbox.
Send an enquiry
Check Price & Availability.
Give us the size or the failed part — we reply on WhatsApp.
Trusted across Metals & Energy
Supplying India’s Industrial Names.
From integrated steel plants to power utilities and EPC majors — the works that cannot afford a counterfeit part specify through SES.
Covers
Tube, hose, fittings, brackets, applicators
Pressure rating
Matched to pump dead-head, not working pressure
Materials
Steel, stainless, polyamide and rubber hose
Failure point
Chafe, vibration fatigue, heat damage
Where it runs.
You will find Accessories for Lubrication Systems in the parts of a plant where this particular duty actually occurs. In practice that means feed tails from divider blocks to bearing housings, brush and pinion applicators on open gears and chains, tube runs along conveyor gantries and structures, and equally flexible connections to moving and articulating members, grease nipple and adaptor fitment on inaccessible points. What links them is the duty rather than the machine name — covers: Tube, hose, fittings, brackets, applicators. If your installation is not on that list it matters less than you would think: the operating condition decides the specification. Send us the load, the speed, the running temperature and the environment it runs in, and we will match it to the right execution in the SKF range and confirm what is in stock.
Specify it against the duty.
Specification here follows the operating condition, not the catalogue. Tube run passing near a furnace, kiln shell or hot process line — Steel or stainless tube with a heat shield, not polyamide. Plastic tube softens and swells long before it melts, and the change in bore alters delivery to everything downstream. Hose feeding a point on a member that swings or pivots — A swivel fitting at the moving end with a generous bend loop. Hose twisted rather than bent fails internally at the crimp, with no external sign until it splits. Pump capable of dead-heading against a blockage — Hose and fittings rated to the maximum pump pressure with the relief valve at its setting. Components chosen on normal working pressure are undersized for the exact moment they matter. Where two of those apply at once, specify for the harsher of the two — under-specifying is what puts the part back on the bench a month later. Send us the duty and we will confirm the execution.
Ordering this from SES.
Clamp every run at roughly half-metre intervals and keep it away from sharp structural edges. Unsupported tube between two fixed points fatigues at the fitting, and that single crack drains the pump output onto the floor while every bearing on that branch starves.