Automatic Lubrication Systems
A pump, metering devices and distribution lines that deliver a measured charge of grease or oil to every lubrication point on a set interval, while the machine runs. Replaces the grease gun round that gets skipped when the plant is busy. SES holds the range as an authorised SKF distributor, covering system types Single-line, dual-line, multi-line, progressive, oil+air, circulating; pump units Electric, pneumatic and manual; drum and reservoir fed; outlets From a single point to several hundred per system; line pressure To 400 bar on dual-line installations. Executions include single-line lubrication systems, dual-line lubrication systems, multi-line lubrication systems, progressive lubrication systems, among others. It is specified most often into long conveyor lines with inaccessible idler banks and kiln tyre and support roller assemblies. Every part is genuine SKF through official channels, with designation, specification and options confirmed against your duty before it ships — supplied from Kolkata and our branch network, with breakdown cover that does not sit in an inbox.
Send an enquiry
Check Price & Availability.
Give us the size or the failed part — we reply on WhatsApp.
Trusted across Metals & Energy
Supplying India’s Industrial Names.
From integrated steel plants to power utilities and EPC majors — the works that cannot afford a counterfeit part specify through SES.
Types
Single-line, dual-line, progressive, multi-line
Media
Grease to NLGI 2 and circulating oils
Control
Timer, machine signal, or condition-based
Monitoring
Cycle switches, pressure switches, low-level alarm
Where it runs.
You will find Automatic Lubrication Systems in the parts of a plant where this particular duty actually occurs. In practice that means long conveyor lines with inaccessible idler banks, kiln tyre and support roller assemblies, crusher and screen bearing groups, and equally press and stamping line slideways, fan and mill bearing pairs in hot areas, crane travel and hoist mechanisms. What links them is the duty rather than the machine name — types: Single-line, dual-line, progressive, multi-line. If your installation is not on that list it matters less than you would think: the operating condition decides the specification. Send us the load, the speed, the running temperature and the environment it runs in, and we will match it to the right execution in the SKF range and confirm what is in stock.
Specify it against the duty.
Specification here follows the operating condition, not the catalogue. Many points spread over a long line, all needing similar volume — Progressive system — the block sequence proves that every point took its charge, and a blockage is visible at the indicator pin. Very large plant with widely different volumes per point — Dual-line system, which holds pressure over long distances and lets each metering device be set individually. Points that are dangerous or impossible to reach while running — Automatic delivery with a low-level and no-flow alarm brought back to the control room. Where two of those apply at once, specify for the harsher of the two — under-specifying is what puts the part back on the bench a month later. Send us the duty and we will confirm the execution.
Ordering this from SES.
Size the system on grams per point per interval, not on the number of points. We will work the calculation from your bearing sizes and running hours before quoting — an undersized pump simply starves the far end of the line.