Lubricators
Single point automatic lubricators that screw onto the grease nipple and dispense a set quantity over weeks or months. They suit points that are unsafe or awkward to reach while the machine runs. SES holds the range as an authorised SKF distributor, covering cartridge sizes About 60 ml to 500 ml; discharge period Adjustable, typically 1 to 12 months; drive types Gas generating cell, electromechanical; temperature range Roughly -20 °C to 60 °C at the unit. Executions include gas cell single point lubricators, electromechanical single point lubricators, multi-point lubricators with pump, refillable units, among others. It is specified most often into conveyor pulley bearings along long overland routes and fan and blower bearings on elevated platforms. Every part is genuine SKF through official channels, with designation, specification and options confirmed against your duty before it ships — supplied from Kolkata and our branch network, with breakdown cover that does not sit in an inbox.
Send an enquiry
Check Price & Availability.
Give us the size or the failed part — we reply on WhatsApp.
Trusted across Metals & Energy
Supplying India’s Industrial Names.
From integrated steel plants to power utilities and EPC majors — the works that cannot afford a counterfeit part specify through SES.
Type
Single point, self-contained
Drive
Gas cell or electromechanical
Period
Settable, typically 1 to 12 months
Fitting
Direct on the nipple or on an extension
Where it runs.
You will find Lubricators in the parts of a plant where this particular duty actually occurs. In practice that means conveyor pulley bearings along long overland routes, fan and blower bearings on elevated platforms, motor bearings inside guarded drive enclosures, and equally crusher and screen points in dusty, hot areas, cooling tower gearbox and fan shaft bearings, remote pump houses visited only occasionally. What links them is the duty rather than the machine name — type: Single point, self-contained. If your installation is not on that list it matters less than you would think: the operating condition decides the specification. Send us the load, the speed, the running temperature and the environment it runs in, and we will match it to the right execution in the SKF range and confirm what is in stock.
Specify it against the duty.
Specification here follows the operating condition, not the catalogue. Point is hot enough to change the discharge rate — An electromechanical lubricator instead of a gas cell type. Gas-driven units speed up as temperature rises and empty months early beside a kiln or a furnace. Bearing needs more than the largest single cartridge holds — A multi-point unit with a pump and lines, since chaining single point lubricators onto one bearing gets forgotten at the first refill. Area is classified hazardous — A lubricator certified for that zone. A standard electromechanical unit has no place in a gas group area, however convenient the mounting is. Where two of those apply at once, specify for the harsher of the two — under-specifying is what puts the part back on the bench a month later. Send us the duty and we will confirm the execution.
Ordering this from SES.
Fit them with a date label on the body and add the change-out to the shutdown list. An expired lubricator left in place blocks the nipple, and everyone assumes the point is still being fed. Send the designation off the failed part and we will confirm the SKF equivalent and stock position.