Products Overview
The entry point to everything SES supplies from SKF. Work down from the family you need — rolling bearings, mounted units, seals or lubrication — and each level narrows until you reach a designation you can raise a requisition against. SES holds the range as an authorised SKF distributor, covering product families Rolling bearings, mounted units, seals, lubrication systems, maintenance tools; bearing bore range 3 mm to over 1000 mm across types; dimension standards ISO boundary dimension plans; clearance classes C2, normal, C3, C4, C5. Executions include bearings, mounted bearings and housings, industrial seals, lubrication systems and lubricants, among others. It is specified most often into sinter and blast furnace auxiliaries in integrated steel plants and raw mill, kiln and cooler lines in cement works. Every part is genuine SKF through official channels, with designation, specification and options confirmed against your duty before it ships — supplied from Kolkata and our branch network, with breakdown cover that does not sit in an inbox.
Send an enquiry
Check Price & Availability.
Give us the size or the failed part — we reply on WhatsApp.
Trusted across Metals & Energy
Supplying India’s Industrial Names.
From integrated steel plants to power utilities and EPC majors — the works that cannot afford a counterfeit part specify through SES.
Families
Bearings, units, seals, lubrication, tools
Bore span
3 mm to over 1000 mm
Identify by
Designation etched on the ring face
Ordering
Base number plus all suffixes
Where it runs.
You will find Products Overview in the parts of a plant where this particular duty actually occurs. In practice that means sinter and blast furnace auxiliaries in integrated steel plants, raw mill, kiln and cooler lines in cement works, ID and FD fan sets, mills and feeders in thermal power stations, and equally withering troughs, rollers and dryers in tea estates, paper machine dryer sections and refiners, long-haul conveyors and stacker-reclaimers in mineral handling. What links them is the duty rather than the machine name — families: Bearings, units, seals, lubrication, tools. If your installation is not on that list it matters less than you would think: the operating condition decides the specification. Send us the load, the speed, the running temperature and the environment it runs in, and we will match it to the right execution in the SKF range and confirm what is in stock.
Specify it against the duty.
Specification here follows the operating condition, not the catalogue. You have a physical sample but no drawing — The full designation read off the ring face, including every letter after the base number. Ordering on bore and outside diameter alone routinely produces a bearing with the wrong clearance class. The shaft is exposed to dust, scale or washdown water — A sealed execution or a separate shaft seal at the same time. Buying the bearing and leaving the seal for later is the commonest reason a new fit is back on the bench in a month. You are standardising spares across several identical machines — One designation per position across the fleet and record it. Mixed clearance classes on the same duty make failure data meaningless. Where two of those apply at once, specify for the harsher of the two — under-specifying is what puts the part back on the bench a month later. Send us the duty and we will confirm the execution.
Ordering this from SES.
Send the full designation, not just bore and outside diameter. The suffix after the base number decides clearance, cage and sealing, and two bearings with identical boundary dimensions can behave very differently in the same housing.