Reali-Slim Thin Section Bearings
The inch-series thin section family, offered in radial, angular and four-point contact geometries across a long span of bores at each fixed cross section. Most legacy equipment is dimensioned around it, so it is usually the family you need for a replacement. SES holds the range as an authorised SKF distributor, covering series Inch cross sections, several fixed sizes; bore span From small joint sizes up to very large diameters; types Radial contact (C), angular contact (A), four-point contact (X); materials Chrome bearing steel, stainless on request. Executions include radial contact (c type), angular contact (a type), four-point contact (x type), Reali-Slim TT turntable bearings, among others. It is specified most often into robotic wrist and shoulder joints and medical imaging and scanner gantries. Every part is genuine SKF through official channels, with designation, specification and options confirmed against your duty before it ships — supplied from Kolkata and our branch network, with breakdown cover that does not sit in an inbox.
Send an enquiry
Check Price & Availability.
Give us the size or the failed part — we reply on WhatsApp.
Trusted across Metals & Energy
Supplying India’s Industrial Names.
From integrated steel plants to power utilities and EPC majors — the works that cannot afford a counterfeit part specify through SES.
Series
Inch cross sections
Types
C radial, A angular, X four-point
Bores
Broad span at each fixed section
Closures
Open, shielded or sealed
Where it runs.
You will find Reali-Slim Thin Section Bearings in the parts of a plant where this particular duty actually occurs. In practice that means robotic wrist and shoulder joints, medical imaging and scanner gantries, antenna and radar rotary axes, and equally aerospace ground support positioners, semiconductor wafer handling stages, precision index tables on inspection rigs. What links them is the duty rather than the machine name — series: Inch cross sections. If your installation is not on that list it matters less than you would think: the operating condition decides the specification. Send us the load, the speed, the running temperature and the environment it runs in, and we will match it to the right execution in the SKF range and confirm what is in stock.
Specify it against the duty.
Specification here follows the operating condition, not the catalogue. You are replacing a bearing on imperial-built equipment — Match the existing cross section code and type letter exactly. A metric substitution of similar bore will not sit correctly in the same housing. The joint has to feel smooth when turned by hand — A sealed execution with a light grease fill. A heavy grease charge in a thin section bearing gives a drag torque the operator can feel on the handwheel. The bearing is exposed to salt air or a washdown process — Stainless rings and balls with a compatible seal material. A chrome steel ring in this section has very little corrosion allowance to give away. Where two of those apply at once, specify for the harsher of the two — under-specifying is what puts the part back on the bench a month later. Send us the duty and we will confirm the execution.
Ordering this from SES.
Store and carry them flat in their tube until they go in. Rings this flexible take a set if they are stood on edge or stacked under weight, and an out-of-round ring will not press into a housing squarely.