SKF Lincoln FlowMaster III
A drum-mounted, air-operated grease pump built for centralised systems on heavy and mobile plant. It is designed to be serviced in the field, with the wear parts of the air motor and lower pump end accessible without unshipping the whole unit. SES holds the range as an authorised SKF distributor, covering drive Compressed air motor with reversing valve; mounting Standard drum covers and bung adaptors; output High-pressure grease for centralised distribution; media Greases through the common NLGI grades used in centralised systems. Executions include bung-mounted models, drum cover mounted models with follower plate, models supplied with air preparation package, models configured for mobile plant packages. It is specified most often into centralised grease supply on mobile crushing and screening plant and drum stations feeding conveyor lubrication circuits. Every part is genuine SKF through official channels, with designation, specification and options confirmed against your duty before it ships — supplied from Kolkata and our branch network, with breakdown cover that does not sit in an inbox.
Send an enquiry
Check Price & Availability.
Give us the size or the failed part — we reply on WhatsApp.
Trusted across Metals & Energy
Supplying India’s Industrial Names.
From integrated steel plants to power utilities and EPC majors — the works that cannot afford a counterfeit part specify through SES.
Type
Air-operated reciprocating barrel pump
Mounting
Drum cover or bung mounting
Duty
Continuous centralised grease supply
Service
Field-repairable air motor and lower end
Where it runs.
You will find SKF Lincoln FlowMaster III in the parts of a plant where this particular duty actually occurs. In practice that means centralised grease supply on mobile crushing and screening plant, drum stations feeding conveyor lubrication circuits, grease systems on port cranes and bulk handling machines, and equally mining shovel and drill rig lubrication packages, fixed plant grease rooms in steel and cement works. What links them is the duty rather than the machine name — type: Air-operated reciprocating barrel pump. If your installation is not on that list it matters less than you would think: the operating condition decides the specification. Send us the load, the speed, the running temperature and the environment it runs in, and we will match it to the right execution in the SKF range and confirm what is in stock.
Specify it against the duty.
Specification here follows the operating condition, not the catalogue. Existing drum station being replaced during a short shutdown — The mounting arrangement and drum size confirmed before the outage, with the follower plate carried as part of the kit. Most changeovers overrun because the cover pattern did not match, not because of the pump. Machine that vibrates heavily in normal service — Rigid bracket mounting for the pump and flexible hose for the first section of the outlet. A hard-piped outlet on a vibrating frame cracks at the first fitting, usually out of sight under the drum cover. System that must run unattended between weekly inspections — Low-level indication on the drum wired into the machine alarm. An empty drum on a pneumatic pump gives no obvious symptom, since the pump simply runs faster and pumps air. Where two of those apply at once, specify for the harsher of the two — under-specifying is what puts the part back on the bench a month later. Send us the duty and we will confirm the execution.
Ordering this from SES.
Order the seal kit with the pump and put it on the shelf with the machine spares. When the pump slows on a night shift, the fault is almost always a worn seal, and a unit waiting weeks for parts means somebody is back to a grease gun and a torch.