Bush Hammer Tools
Rotating heads carrying hardened pins that hammer the surface rather than abrade it. The impact fractures off the top layer and leaves a textured, exposed finish with genuine grip. SES holds the range as an authorised Tyrolit distributor, covering head forms Roller heads and plate heads; pins Hardened steel or carbide tipped; pin counts Low for coarse texture, high for fine; fitment Quick-change or bolt-on to grinder plate. Executions include roller bush hammer heads, plate bush hammer heads, coarse pin heads, fine pin heads, among others. It is specified most often into texturing vehicle ramps and loading bays and roughening slabs before a bonded overlay. Every part is genuine Tyrolit through official channels, with designation, specification and options confirmed against your duty before it ships — supplied from Kolkata and our branch network, with breakdown cover that does not sit in an inbox.
Send an enquiry
Check Price & Availability.
Give us the size or the failed part — we reply on WhatsApp.
Trusted across Metals & Energy
Supplying India’s Industrial Names.
From integrated steel plants to power utilities and EPC majors — the works that cannot afford a counterfeit part specify through SES.
Action
Impact, not abrasion
Result
Textured anti-slip surface
Heads
Roller and plate types
Texture
Set by pin count and passes
Where it runs.
You will find Bush Hammer Tools in the parts of a plant where this particular duty actually occurs. In practice that means texturing vehicle ramps and loading bays, roughening slabs before a bonded overlay, producing anti-slip finishes in wet-process areas, and equally exposing aggregate on precast panels, removing thin hard coatings from concrete, keying wash-down floors in food and beverage plant. What links them is the duty rather than the machine name — action: Impact, not abrasion. If your installation is not on that list it matters less than you would think: the operating condition decides the specification. Send us the load, the speed, the running temperature and the environment it runs in, and we will match it to the right execution in the Tyrolit range and confirm what is in stock.
Specify it against the duty.
Specification here follows the operating condition, not the catalogue. Slab is thin or already showing cracks — Fewer pins and a lighter machine. Bush hammering drives shock into the slab and will open up any crack that is already there. Client wants texture but no readable pattern — A high pin-count head worked in two passes at right angles. Low pin counts leave a line pattern that stands out under low-angle light. Surface has to accept a bonded screed afterwards — Coarse pin heads to open the surface fully, then vacuum hard. Hammered dust left in place kills adhesion more reliably than a smooth surface would. Where two of those apply at once, specify for the harsher of the two — under-specifying is what puts the part back on the bench a month later. Send us the duty and we will confirm the execution.
Ordering this from SES.
Pins wear as a set, and a head with two dead pins hammers unevenly and shakes the whole machine. Replace the full set rather than the worn ones or the head will never run balanced again. Send the designation off the failed part and we will confirm the Tyrolit equivalent and stock position.