Fleece Rolls and Fleece Sheets
Open-web non-woven abrasive in roll and cut-sheet form for hand work. Grain runs through the full thickness of the nylon web, so the material keeps cutting as it wears instead of loading up the way paper does. SES holds the range as an authorised Tyrolit distributor, covering backing Nylon non-woven web; grain Aluminium oxide and silicon carbide; grades Coarse, medium, fine, very fine, ultra fine; formats Continuous rolls and pre-cut hand sheets. Executions include fleece rolls, general purpose, fleece hand sheets, perforated tear-off rolls, silicon carbide grades for non-ferrous, among others. It is specified most often into keying primed steelwork before topcoat in a fabrication shop and taking light rust off plate and sections held in stores. Every part is genuine Tyrolit through official channels, with designation, specification and options confirmed against your duty before it ships — supplied from Kolkata and our branch network, with breakdown cover that does not sit in an inbox.
Send an enquiry
Check Price & Availability.
Give us the size or the failed part — we reply on WhatsApp.
Trusted across Metals & Energy
Supplying India’s Industrial Names.
From integrated steel plants to power utilities and EPC majors — the works that cannot afford a counterfeit part specify through SES.
Format
Roll or pre-cut hand sheet
Action
Clean, key, blend by hand
Grades
Coarse to ultra fine
Method
Dry, or with water, oil or paste
Where it runs.
You will find Fleece Rolls and Fleece Sheets in the parts of a plant where this particular duty actually occurs. In practice that means keying primed steelwork before topcoat in a fabrication shop, taking light rust off plate and sections held in stores, hand-blending machining marks on stainless vessel shells, and equally cleaning shaft journals and seal seats during a shutdown, de-glazing painted surfaces on a shipyard refit, final scuffing of aluminium panels before bonding. What links them is the duty rather than the machine name — format: Roll or pre-cut hand sheet. If your installation is not on that list it matters less than you would think: the operating condition decides the specification. Send us the load, the speed, the running temperature and the environment it runs in, and we will match it to the right execution in the Tyrolit range and confirm what is in stock.
Specify it against the duty.
Specification here follows the operating condition, not the catalogue. Surface is going straight under paint — A medium or fine grade that leaves an even scratch pattern. Coarse fleece cuts a profile too deep for the primer to fill and the pattern telegraphs through the topcoat. Cleaning a journal you intend to put back into service — Ultra fine grade, dry, with almost no pressure. Anything coarser moves the diameter and destroys the seal running track. Working with oil, water or polishing paste — The waterproof grade. Standard fleece loses its binder once solvent softens it and the web tears into strings. Where two of those apply at once, specify for the harsher of the two — under-specifying is what puts the part back on the bench a month later. Send us the duty and we will confirm the execution.
Ordering this from SES.
Fleece feels gentle, so it gets used long past its life. Once the web has gone grey and shiny it is burnishing rather than cutting, the operator leans harder to compensate, and the surface burns. Send the designation off the failed part and we will confirm the Tyrolit equivalent and stock position.