Floor Milling Machines
Drum machines carrying cutters or flails on a rotating shaft, taking material off a floor or road surface in one aggressive pass. What they leave behind is a coarse keyed profile, not a smooth one. SES holds the range as an authorised Tyrolit distributor, covering drum tooling Tungsten carbide cutters, star flails, beam flails; working widths Hand-held widths up to walk-behind drum widths; depth control Screw or lever adjustment with stop; drives Electric and petrol. Executions include walk-behind floor milling machines, hand-held milling machines, electric drive milling machines, petrol drive milling machines, among others. It is specified most often into removing failed screed in plant floors and roughening ramps and roadways for grip. Every part is genuine Tyrolit through official channels, with designation, specification and options confirmed against your duty before it ships — supplied from Kolkata and our branch network, with breakdown cover that does not sit in an inbox.
Send an enquiry
Check Price & Availability.
Give us the size or the failed part — we reply on WhatsApp.
Trusted across Metals & Energy
Supplying India’s Industrial Names.
From integrated steel plants to power utilities and EPC majors — the works that cannot afford a counterfeit part specify through SES.
Action
Rotating drum with cutters or flails
Removal
Deep and aggressive
Materials
Concrete, screed, asphalt, thick coatings
Depth
Set by drum height adjustment
Where it runs.
You will find Floor Milling Machines in the parts of a plant where this particular duty actually occurs. In practice that means removing failed screed in plant floors, roughening ramps and roadways for grip, taking off thermoplastic markings in works areas, and equally cutting a slab back before a bonded overlay, removing heavy build-up in loading bays, levelling trip hazards at slab joints. What links them is the duty rather than the machine name — action: Rotating drum with cutters or flails. If your installation is not on that list it matters less than you would think: the operating condition decides the specification. Send us the load, the speed, the running temperature and the environment it runs in, and we will match it to the right execution in the Tyrolit range and confirm what is in stock.
Specify it against the duty.
Specification here follows the operating condition, not the catalogue. A bonded overlay is to follow — Mill deep enough to key, then grind or shot blast to clear the fines. An overlay bonded onto milling debris lifts in sheets within months. Asphalt or bitumen surfaces — Tungsten carbide cutters with generous clearance. Star and beam flails meant for concrete pack solid with bitumen and the drum stalls. Working near buried services or a thin topping — Small depth increments against a positive stop. A milling drum finds a conduit in a single pass and does not stop when it does. Where two of those apply at once, specify for the harsher of the two — under-specifying is what puts the part back on the bench a month later. Send us the duty and we will confirm the execution.
Ordering this from SES.
Cutters wear as a set and should be replaced as a set. Fitting a handful of new tips leaves the drum out of balance, and scarifier bearings do not last long once the machine starts hammering. Send the designation off the failed part and we will confirm the Tyrolit equivalent and stock position.