Floor Saws
Walk-behind saws that drive a large diamond blade down through a slab or road surface on a guided frame. Cutting depth follows blade diameter, so the blade size chooses the machine. SES holds the range as an authorised Tyrolit distributor, covering blade sizes Small joint blades up to large road blades; drives Petrol, diesel, electric, hydraulic; depth control Screw or hydraulic blade lowering; water Tank or mains-fed blade cooling. Executions include petrol floor saws, electric floor saws, hydraulic floor saws, early-entry joint saws, among others. It is specified most often into expansion and contraction joints in new slabs and trench cuts for cable and pipe routes on plant roads. Every part is genuine Tyrolit through official channels, with designation, specification and options confirmed against your duty before it ships — supplied from Kolkata and our branch network, with breakdown cover that does not sit in an inbox.
Send an enquiry
Check Price & Availability.
Give us the size or the failed part — we reply on WhatsApp.
Trusted across Metals & Energy
Supplying India’s Industrial Names.
From integrated steel plants to power utilities and EPC majors — the works that cannot afford a counterfeit part specify through SES.
Drive
Petrol, diesel, electric, hydraulic
Blades
Large diameter, wet cutting typical
Depth
Set by blade radius and guard
Cut
Straight, guided, full depth
Where it runs.
You will find Floor Saws in the parts of a plant where this particular duty actually occurs. In practice that means expansion and contraction joints in new slabs, trench cuts for cable and pipe routes on plant roads, cutting out damaged slab panels for replacement, and equally road opening for utility work inside plant premises, asphalt cutting in yard and haul road repairs, sectioning floors before breaking out foundations. What links them is the duty rather than the machine name — drive: Petrol, diesel, electric, hydraulic. If your installation is not on that list it matters less than you would think: the operating condition decides the specification. Send us the load, the speed, the running temperature and the environment it runs in, and we will match it to the right execution in the Tyrolit range and confirm what is in stock.
Specify it against the duty.
Specification here follows the operating condition, not the catalogue. Green concrete with joints to be cut within hours — An early-entry saw with its matched blade and skid plate. A conventional saw on green concrete ravels the joint arris and the cut looks torn. Cutting indoors in an operating plant — Electric or hydraulic drive. A petrol floor saw indoors needs forced ventilation and gas monitoring, and most plants will not issue that permit. Deep cut through a reinforced slab — Stepped passes rather than dropping the blade to full depth at once. A blade forced in one pass loses segments where it meets rebar and wanders off line. Where two of those apply at once, specify for the harsher of the two — under-specifying is what puts the part back on the bench a month later. Send us the duty and we will confirm the execution.
Ordering this from SES.
Check blade rotation direction and flange condition at every blade change. A dished flange lets the blade run out, and the operator feels it as the machine steering itself off the line. Send the designation off the failed part and we will confirm the Tyrolit equivalent and stock position.