Free Hand
The hand-held cutting group: power cutters, hand saws, ring saws, wall chasers and hand-held concrete grinders. These machines go where a rail-guided saw cannot, trading depth and cut accuracy for access. SES holds the range as an authorised Tyrolit distributor, covering machine types Power cutters, hand saws, ring saws, chasers, grinders; blade sizes Small hand-held sizes through to large cutter blades; drives Petrol, electric, hydraulic, battery; cooling Wet cutting, or dry with extraction. Executions include power cutters, hand saws, ring saws, wall chasers, among others. It is specified most often into openings in block and brick partitions and trimming and squaring edges after core drilling. Every part is genuine Tyrolit through official channels, with designation, specification and options confirmed against your duty before it ships — supplied from Kolkata and our branch network, with breakdown cover that does not sit in an inbox.
Send an enquiry
Check Price & Availability.
Give us the size or the failed part — we reply on WhatsApp.
Trusted across Metals & Energy
Supplying India’s Industrial Names.
From integrated steel plants to power utilities and EPC majors — the works that cannot afford a counterfeit part specify through SES.
Guidance
Operator held, no rail
Depth
Limited by blade or ring geometry
Drives
Petrol, electric, hydraulic, battery
Best for
Restricted access and short cuts
Where it runs.
You will find Free Hand in the parts of a plant where this particular duty actually occurs. In practice that means openings in block and brick partitions, trimming and squaring edges after core drilling, pipe and duct cutting in service risers, and equally cutting reinforcement and small sections during demolition, confined-space and rescue cutting work, chasing and finishing work during plant refurbishment. What links them is the duty rather than the machine name — guidance: Operator held, no rail. If your installation is not on that list it matters less than you would think: the operating condition decides the specification. Send us the load, the speed, the running temperature and the environment it runs in, and we will match it to the right execution in the Tyrolit range and confirm what is in stock.
Specify it against the duty.
Specification here follows the operating condition, not the catalogue. Cut depth needed exceeds about a third of the blade diameter — A ring saw rather than a power cutter. A conventional blade cannot beat its own arbor and guard geometry however hard it is pushed. Enclosed or occupied space — Electric or hydraulic hand machines with water or extraction. A petrol cutter in a confined space is a carbon monoxide exposure before it is a dust problem. A straight, square opening in a wall — Score the line by hand but finish with a track-guided wall saw. Free-hand cuts wander with depth and the opening ends up out of square at the back face. Where two of those apply at once, specify for the harsher of the two — under-specifying is what puts the part back on the bench a month later. Send us the duty and we will confirm the execution.
Ordering this from SES.
Free-hand machines are the ones that come back damaged. Keep spare blade flanges and guard fixings in the store, because a bent guard is usually the reason a machine gets used without one. Send the designation off the failed part and we will confirm the Tyrolit equivalent and stock position.