Hand and Ring Saws
Two hand-held forms: the conventional blade-and-arbor power cutter, and the ring saw where the blade is driven at its rim so nothing sits in the middle of the cut. Rim drive roughly doubles the depth available from the same outside diameter. SES holds the range as an authorised Tyrolit distributor, covering blade diameters Common hand-held sizes up to large cutter blades; ring saw depth Substantially deeper than a conventional blade of the same size; drives Petrol, hydraulic, high-frequency electric, battery; water Pressure bottle or mains connection. Executions include petrol power cutters, hydraulic hand saws, high-frequency electric hand saws, battery hand saws, among others. It is specified most often into openings in masonry and light RCC walls and flush cutting of pipes and steel sections in demolition. Every part is genuine Tyrolit through official channels, with designation, specification and options confirmed against your duty before it ships — supplied from Kolkata and our branch network, with breakdown cover that does not sit in an inbox.
Send an enquiry
Check Price & Availability.
Give us the size or the failed part — we reply on WhatsApp.
Trusted across Metals & Energy
Supplying India’s Industrial Names.
From integrated steel plants to power utilities and EPC majors — the works that cannot afford a counterfeit part specify through SES.
Blade drive
Central arbor or rim-driven ring
Depth
Ring saw cuts deeper for its size
Drives
Petrol, hydraulic, electric, battery
Cooling
Water fed to the blade
Where it runs.
You will find Hand and Ring Saws in the parts of a plant where this particular duty actually occurs. In practice that means openings in masonry and light RCC walls, flush cutting of pipes and steel sections in demolition, wall and floor cuts in confined plant rooms, and equally cutting concrete pipe and manhole rings, emergency access cutting for rescue services, trimming beam and slab edges during structural repairs. What links them is the duty rather than the machine name — blade drive: Central arbor or rim-driven ring. If your installation is not on that list it matters less than you would think: the operating condition decides the specification. Send us the load, the speed, the running temperature and the environment it runs in, and we will match it to the right execution in the Tyrolit range and confirm what is in stock.
Specify it against the duty.
Specification here follows the operating condition, not the catalogue. Deep cut with a machine the operator has to carry — The ring saw. Its depth is limited by the ring itself, not by an arbor and guard sitting behind the cut. Underwater or wet-well work — A hydraulic saw on a submersible-rated circuit. Electric hand saws have no place standing in water however good the RCD is. Steel and reinforcement inside the cut — A blade with a bond intended for mixed material. A hard-bond concrete blade glazes on plain steel within seconds. Where two of those apply at once, specify for the harsher of the two — under-specifying is what puts the part back on the bench a month later. Send us the duty and we will confirm the execution.
Ordering this from SES.
On a ring saw the drive wheels and guide rollers wear faster than the blade. Once the ring rattles in the guides the cut goes off square and the blade edge starts chipping. Send the designation off the failed part and we will confirm the Tyrolit equivalent and stock position.