Machines
The powered side of the concrete cutting and floor preparation range: core drilling, floor and wall sawing, wire sawing, hand-held cutting, floor preparation, and the power packs and extraction gear behind them. Pick the machine for the access and the depth, then match the diamond tool to it. SES holds the range as an authorised Tyrolit distributor, covering machine groups Core drilling, floor saws, wall saws, wire saws, free hand; floor group Grinders, milling machines, strippers, shot blasters; power sources Single and three phase electric, hydraulic, petrol; support gear Power packs, dust extractors, slurry collectors. Executions include core drilling, floor saws, wall saws, wire saws, among others. It is specified most often into openings and penetrations through RCC floors and shear walls and expansion joint and trench cutting on plant roadways. Every part is genuine Tyrolit through official channels, with designation, specification and options confirmed against your duty before it ships — supplied from Kolkata and our branch network, with breakdown cover that does not sit in an inbox.
Send an enquiry
Check Price & Availability.
Give us the size or the failed part — we reply on WhatsApp.
Trusted across Metals & Energy
Supplying India’s Industrial Names.
From integrated steel plants to power utilities and EPC majors — the works that cannot afford a counterfeit part specify through SES.
Groups
Drilling, sawing, grinding, extraction
Drives
Electric, high-frequency, hydraulic, petrol
Materials
Concrete, reinforced concrete, masonry, asphalt
Site fit
Occupied buildings through to open civil work
Where it runs.
You will find Machines in the parts of a plant where this particular duty actually occurs. In practice that means openings and penetrations through RCC floors and shear walls, expansion joint and trench cutting on plant roadways, demolition of machine foundations and equipment blocks, and equally floor preparation ahead of epoxy or PU systems in workshops, deep cutting where no circular blade can reach, service holes for cable, duct and pipe routing in plant buildings. What links them is the duty rather than the machine name — groups: Drilling, sawing, grinding, extraction. If your installation is not on that list it matters less than you would think: the operating condition decides the specification. Send us the load, the speed, the running temperature and the environment it runs in, and we will match it to the right execution in the Tyrolit range and confirm what is in stock.
Specify it against the duty.
Specification here follows the operating condition, not the catalogue. A circular opening up to roughly half a metre across — A core drilling system. Squaring a round hole with a hand saw leaves overcuts at the corners that a structural engineer will refuse to accept. Cut depth beyond what a floor saw blade can reach — Wire sawing. Chasing depth by cutting from both faces with a wall saw rarely aligns and leaves a step at mid-thickness. Work inside an occupied or food-grade building — Electric or high-frequency drives with dust extraction. Petrol saws put exhaust and respirable silica into a space that then has to be decontaminated before handover. Where two of those apply at once, specify for the harsher of the two — under-specifying is what puts the part back on the bench a month later. Send us the duty and we will confirm the execution.
Ordering this from SES.
Specify the segment bond against the machine power and the aggregate hardness together. A tool bought for a large rig glazes on a small motor, and the operator will blame the tool rather than the pairing.