Maintenance Pads
Pads for scrubber-driers and rotary machines that keep a finished floor looking the way it did on handover. They clean, burnish and lift light marking without cutting into the polish itself. SES holds the range as an authorised Tyrolit distributor, covering types Diamond-impregnated and conventional buffing pads; cut Very light - maintenance, not restoration; diameters Common scrubber and rotary sizes; method Wet with neutral cleaner, or dry burnish. Executions include diamond maintenance pads, daily cleaning pads, burnishing pads, scrubber-drier pads, among others. It is specified most often into daily cleaning of polished concrete in retail units and burnishing terrazzo corridors in hospitals. Every part is genuine Tyrolit through official channels, with designation, specification and options confirmed against your duty before it ships — supplied from Kolkata and our branch network, with breakdown cover that does not sit in an inbox.
Send an enquiry
Check Price & Availability.
Give us the size or the failed part — we reply on WhatsApp.
Trusted across Metals & Energy
Supplying India’s Industrial Names.
From integrated steel plants to power utilities and EPC majors — the works that cannot afford a counterfeit part specify through SES.
Machines
Scrubber-drier and rotary
Job
Clean, burnish, refresh
Cut
Very light
Cycle
Routine, not restorative
Where it runs.
You will find Maintenance Pads in the parts of a plant where this particular duty actually occurs. In practice that means daily cleaning of polished concrete in retail units, burnishing terrazzo corridors in hospitals, removing tyre and scuff marks in vehicle showrooms, and equally maintaining warehouse aisles between coating cycles, refreshing gloss in hotel and airport public areas, cleaning stone floors without stripping the seal. What links them is the duty rather than the machine name — machines: Scrubber-drier and rotary. If your installation is not on that list it matters less than you would think: the operating condition decides the specification. Send us the load, the speed, the running temperature and the environment it runs in, and we will match it to the right execution in the Tyrolit range and confirm what is in stock.
Specify it against the duty.
Specification here follows the operating condition, not the catalogue. Floor is marked but not actually worn — The lightest maintenance grade available. Anything with real cut dulls the gloss and commits you to a full polishing visit. Rubber tyre marks that will not lift — A slightly more aggressive pad with a neutral cleaner, worked locally on the mark. Using it across the whole floor changes the sheen in patches. Sealed or coated floor — Check the pad against the coating system first. A diamond-impregnated pad thins a sacrificial seal in a handful of passes. Where two of those apply at once, specify for the harsher of the two — under-specifying is what puts the part back on the bench a month later. Send us the duty and we will confirm the execution.
Ordering this from SES.
Turn the pads through the shift and wash them out at the end of it. A pad left loaded with slurry sets hard overnight into something that scratches the floor it was bought to protect. Send the designation off the failed part and we will confirm the Tyrolit equivalent and stock position.