Non-woven Discs
Non-woven abrasive discs for angle and mini grinders, mounted on a backing pad or a quick-lock spindle. They strip rust, weld discolouration and old coatings without eating into the parent metal the way a fibre disc does. SES holds the range as an authorised Tyrolit distributor, covering diameters 100 mm to 180 mm; construction Nylon web on a fibre-glass reinforced backing; grades Coarse, medium, fine; grain Aluminium oxide and silicon carbide. Executions include coarse strip discs, medium surface-conditioning discs, fine finishing discs, quick-lock mounted discs, among others. It is specified most often into removing heat tint from stainless weld seams and stripping mill scale off plate edges before welding. Every part is genuine Tyrolit through official channels, with designation, specification and options confirmed against your duty before it ships — supplied from Kolkata and our branch network, with breakdown cover that does not sit in an inbox.
Send an enquiry
Check Price & Availability.
Give us the size or the failed part — we reply on WhatsApp.
Trusted across Metals & Energy
Supplying India’s Industrial Names.
From integrated steel plants to power utilities and EPC majors — the works that cannot afford a counterfeit part specify through SES.
Fitment
Backing pad or quick-lock thread
Action
Strip, clean, condition
Metal loss
Minimal - profile preserved
Diameters
100 mm to 180 mm
Where it runs.
You will find Non-woven Discs in the parts of a plant where this particular duty actually occurs. In practice that means removing heat tint from stainless weld seams, stripping mill scale off plate edges before welding, cleaning structural steel during shipyard refit work, and equally blending grinding marks on food-grade tank exteriors, taking old paint off cast housings in a maintenance workshop, preparing weld areas ahead of dye-penetrant inspection. What links them is the duty rather than the machine name — fitment: Backing pad or quick-lock thread. If your installation is not on that list it matters less than you would think: the operating condition decides the specification. Send us the load, the speed, the running temperature and the environment it runs in, and we will match it to the right execution in the Tyrolit range and confirm what is in stock.
Specify it against the duty.
Specification here follows the operating condition, not the catalogue. Coating must come off but the profile must stay exactly as it is — A non-woven disc in place of a flap or fibre disc. Coated abrasives round the edge and thin the section long before the operator notices. Stainless weld that has to pass a corrosion test — A contaminant-free disc on a fresh backing pad. Carbon steel debris carried across on an old pad blooms as rust within weeks of handover. Overhead or vertical face work — The lighter mini-grinder sizes. A 180 mm disc on a large grinder cannot be held steady overhead and the finish shows every wobble. Where two of those apply at once, specify for the harsher of the two — under-specifying is what puts the part back on the bench a month later. Send us the duty and we will confirm the execution.
Ordering this from SES.
These discs run cool but they are speed sensitive. On a 100 mm grinder with no electronic control, introduce the disc flat and never edge-first, or the web tears off the backing at the first hard corner.