Pressing, crushing and slurry collectors
The support equipment around a cutting job: hydraulic crushers and pressing tools that break out cut sections, and vacuums that lift saw slurry before it travels. This group decides how clean and how controlled the demolition is. SES holds the range as an authorised Tyrolit distributor, covering crusher types Hydraulic jaw crushers in several jaw openings; crusher drive Fed from a matched hydraulic power pack; slurry vacuums Wet capacity with float cut-out and pump discharge; filtration Wet filters and separators. Executions include hydraulic concrete crushers, crusher jaw sets and wear parts, slurry vacuums, pump-out slurry collectors, among others. It is specified most often into breaking out cut slab sections without a breaker and silent demolition beside running plant and instrumentation. Every part is genuine Tyrolit through official channels, with designation, specification and options confirmed against your duty before it ships — supplied from Kolkata and our branch network, with breakdown cover that does not sit in an inbox.
Send an enquiry
Check Price & Availability.
Give us the size or the failed part — we reply on WhatsApp.
Trusted across Metals & Energy
Supplying India’s Industrial Names.
From integrated steel plants to power utilities and EPC majors — the works that cannot afford a counterfeit part specify through SES.
Crushers
Hydraulic jaw, silent breaking
Pressing
Splitting and pushing cut sections
Slurry
Wet vacuum with pumped discharge
Setting
Occupied plant, low noise, low vibration
Where it runs.
You will find Pressing, crushing and slurry collectors in the parts of a plant where this particular duty actually occurs. In practice that means breaking out cut slab sections without a breaker, silent demolition beside running plant and instrumentation, removing wall panels after saw cutting, and equally collecting saw slurry inside finished buildings, clearing slurry ahead of a flooring contractor, controlled demolition around live cables and pipework. What links them is the duty rather than the machine name — crushers: Hydraulic jaw, silent breaking. If your installation is not on that list it matters less than you would think: the operating condition decides the specification. Send us the load, the speed, the running temperature and the environment it runs in, and we will match it to the right execution in the Tyrolit range and confirm what is in stock.
Specify it against the duty.
Specification here follows the operating condition, not the catalogue. Vibration-sensitive equipment nearby — A hydraulic crusher in place of a breaker. Percussive breaking travels through the slab and will trip vibration monitors on rotating machinery. Cut sections too large to lift out whole — Check jaw opening against section thickness before the saw cuts are set out. A jaw that will not close on the section is a wasted mobilisation. Wet cutting inside a finished building — A slurry vacuum with pump-out and a bunded catch tray at the cut. Slurry that reaches a floor drain sets in the trap and the plumbing bill exceeds the cutting bill. Where two of those apply at once, specify for the harsher of the two — under-specifying is what puts the part back on the bench a month later. Send us the duty and we will confirm the execution.
Ordering this from SES.
Size slurry collection to the saw, not to the size of the room. A wire saw running continuously puts out far more water than people expect, and once it is running down a stairwell nobody catches up with it.