Rolls and Sheets
Coated abrasive on cloth or paper backing, supplied in rolls and cut sheets for hand and block work. The backing decides the behaviour - cloth flexes around a profile, paper stays flat and cuts a truer surface. SES holds the range as an authorised Tyrolit distributor, covering backings Cotton cloth, polyester cloth, latex paper; grains Aluminium oxide, silicon carbide, zirconia; grit range Coarse P24 to very fine finishing grits; roll widths Narrow shop rolls up to wide slitting rolls. Executions include cloth shop rolls, emery cloth rolls, waterproof paper sheets, dry sanding paper sheets, among others. It is specified most often into hand-finishing die and mould cavities in a tool room and flatting filler and primer in vehicle body repair. Every part is genuine Tyrolit through official channels, with designation, specification and options confirmed against your duty before it ships — supplied from Kolkata and our branch network, with breakdown cover that does not sit in an inbox.
Send an enquiry
Check Price & Availability.
Give us the size or the failed part — we reply on WhatsApp.
Trusted across Metals & Energy
Supplying India’s Industrial Names.
From integrated steel plants to power utilities and EPC majors — the works that cannot afford a counterfeit part specify through SES.
Backing
Cloth or latex paper
Grit span
Coarse to very fine
Format
Roll or cut sheet
Use
Hand, block or file board
Where it runs.
You will find Rolls and Sheets in the parts of a plant where this particular duty actually occurs. In practice that means hand-finishing die and mould cavities in a tool room, flatting filler and primer in vehicle body repair, cleaning weld spatter off machined faces, and equally preparing timber patterns in a foundry pattern shop, deburring sheet metal edges on the bench, dressing keyways and seal seats during overhaul. What links them is the duty rather than the machine name — backing: Cloth or latex paper. If your installation is not on that list it matters less than you would think: the operating condition decides the specification. Send us the load, the speed, the running temperature and the environment it runs in, and we will match it to the right execution in the Tyrolit range and confirm what is in stock.
Specify it against the duty.
Specification here follows the operating condition, not the catalogue. Sanding into a corner or around a curve — Cloth-backed roll torn to width. Paper cracks at the fold and the crease leaves a hard witness line across the work. Flat surface that has to stay flat — Paper on a rigid block. Freehand cloth follows every hollow already there and deepens it. Resinous timber, filler or soft coating — Open-coat grades, changed early. Closed-coat grits load solid and then burnish and scorch instead of cutting. Where two of those apply at once, specify for the harsher of the two — under-specifying is what puts the part back on the bench a month later. Send us the duty and we will confirm the execution.
Ordering this from SES.
Store rolls flat and well away from a damp wall. Coated abrasives take up moisture, the backing curls, and a curled roll will not sit on a block - most shops lose more stock to storage than to wear. Send the designation off the failed part and we will confirm the Tyrolit equivalent and stock position.