Rough Cleaning Rollers
Cylindrical cleaning tools fitted to satin finishers, pipe belt sanders and straight grinders. Because the full width contacts at once, they clean long runs and tube surfaces evenly and leave no arc marks. SES holds the range as an authorised Tyrolit distributor, covering diameters Commonly 100 mm and above; widths Roughly 50 mm to 120 mm, machine matched; constructions Non-woven, interleaved, filament, flap; grades Coarse cleaning through to fine satin finishing. Executions include non-woven cleaning rollers, interleaved flap rollers, filament cleaning rollers, coarse stripping rollers, among others. It is specified most often into cleaning and finishing stainless tube and handrail and uniform satin finishing of sheet and panel work. Every part is genuine Tyrolit through official channels, with designation, specification and options confirmed against your duty before it ships — supplied from Kolkata and our branch network, with breakdown cover that does not sit in an inbox.
Send an enquiry
Check Price & Availability.
Give us the size or the failed part — we reply on WhatsApp.
Trusted across Metals & Energy
Supplying India’s Industrial Names.
From integrated steel plants to power utilities and EPC majors — the works that cannot afford a counterfeit part specify through SES.
Form
Cylindrical roller on an arbor
Machines
Satin finisher, pipe belt sander, straight grinder
Advantage
Even finish over long runs
Grades
Coarse cleaning to fine satin
Where it runs.
You will find Rough Cleaning Rollers in the parts of a plant where this particular duty actually occurs. In practice that means cleaning and finishing stainless tube and handrail, uniform satin finishing of sheet and panel work, removing heat tint along a welded seam, and equally cleaning long structural sections before coating, dairy, brewery and pharmaceutical pipework finishing, blending a repaired panel to match the surrounding finish. What links them is the duty rather than the machine name — form: Cylindrical roller on an arbor. If your installation is not on that list it matters less than you would think: the operating condition decides the specification. Send us the load, the speed, the running temperature and the environment it runs in, and we will match it to the right execution in the Tyrolit range and confirm what is in stock.
Specify it against the duty.
Specification here follows the operating condition, not the catalogue. Directional satin finish that must match an existing panel — The correct grade run in one continuous pass per stroke. Stopping mid-panel leaves a witness line that cannot be blended out afterwards. Round tube and handrail — A roller on a pipe belt machine that wraps the tube. A flat disc on a round section contacts on a line and leaves flats behind. Weld tint on stainless that has to be fully removed — A coarse roller first, then a finer grade, then a check for residual tint. Cleaning to appearance alone leaves the corrosion risk in place. Where two of those apply at once, specify for the harsher of the two — under-specifying is what puts the part back on the bench a month later. Send us the duty and we will confirm the execution.
Ordering this from SES.
Hold a spare roller of every grade you use, as a set. Finishes are matched by grade, and if the roller a job was finished with is unavailable for the repair six months later, that patch will never blend in.